Channel baling press

Channel baling press TYPE AVOS 1810 B5

Powerful and economical for big tasks

Looking for the ultimate solution for compacting large quantities of waste? Then the AVOS 1810 B5 channel baling press is the machine you need! With its plunger guide on plastic rails or steel rollers, it offers maximum flexibility. Whether fine-grained materials or highly expanding fabrics – with the optional cross binding, it masters every challenge. Thanks to the innovative “OptiCut” cutting system and the energy-efficient hydraulic pumps, you can rely on impressive performance. And the sophisticated key transfer system (optional) ensures maximum operational safety. Let EcoTech Solutions advise you and discover the possibilities of this outstanding machine! Are you ready to take your business to the next level?

Good handling: Extra large insertion chute
Powerful: compacting very large quantities of waste and recyclable materials
Tried and tested: Proven technology from over 40 years of experience
Download product data sheet
Get in touch
Installation of an AVOS 1810 B5-90/100
Press plunger for cross binding

TYPE AVOS 1810 B5:

The fully automatic AVOS 1810 B5 channel baling press is ideal for compacting cardboard, paper, plastics and other recycling materials. State-of-the-art technology in accordance with the C standard for horizontal channel balers published in 2013 (DIN EN 16252).

You determine the details - for an optimal setup

  • Manual hopper
  • Bale slide
  • Touchscreen display

Valid for all machines

  • Bale length: Adjustable
  • Binding: 5-fold vertical
  • Optionally with cross binding: 5-fold vertical, 3-fold horizontal
  • Electrical connection: 3 x 400 V, N, PE/50 Hz
Basic version
Mechanics
  • Durable machine frame in sturdy welded construction, designed for fastening to the hall floor with dowels
  • Rapid/power speed control and automatic speed adjustment, depending on the required pressing pressure for optimum material throughput
  • Cutting blade on the plunger and counter plate, hardened and tempered, for cutting off protruding material. Knife hardness: 56 + 4 HRC
  • Press plunger guide with low-maintenance plastic guides, highly wear-resistant and insensitive to dirt. Excellent accessibility for easy adjustment of the guides to minimize cutting forces
  • Press plunger with feed chute cover for continuous feeding of the machine
  • Fully automatic press channel adjustment on three sides with press pressure-dependent control
  • Automatic wire tying with drill fingers made of highly wear-resistant NAXTRA material and an integrated wire cutting unit guarantees secure bale tying. Possible wire thicknesses (diameter): 2.8 mm/3.1 mm (standard 2.8 mm)
  • Electrical switchgear with programmable logic controller (PLC) Siemens Simatic S7 300 incl. Switching and operating elements.
  • Touchscreen display 7.5″ TFT, 96 MB, resolution 640 x 480 pixels (VGA), for operating the machine incl. Display of operating states and recording of machine performance data, operation in an ambient temperature of 0 to 55°C
  • Potential-free contacts for EMERGENCY STOP, automatic operation, collective fault, overfill protection, material feed conveyor belt.
  • Integration of external EMERGENCY STOP in the baler control system.
  • Electrically controlled bale length measuring device.
  • Switch cabinet heating.
  • Photocells in the press shaft for press stroke control and as overfill protection.
  • Power-regulated, energy-efficient ram drive via axial piston pump, type Rexroth A10, operating pressure: 220 bar
  • HLP46 hydraulic oil equipment, capacity: 450 l, with safety level switch that switches off the machine if the oil level is too low
  • Filter circuit for the hydraulic oil, oil filtration with 3-µm filter
  • Oil/air cooling, for cooling the hydraulic oil
  • Hydraulic block with screwed-on valves, mounted on the hydraulic block, easily accessible for maintenance work
  • Rexroth valve technology for gentle and energy-saving system operation
description data

Dimensions:
(L x W x H)

4,000 x 1,670 x 2,500 mm

Filling shaft cross-section:
(L x W)

800 x 800 mm

Bale size (W x H):
(adjustable length)

800 x 550 mm

Tape connection:

 Optionally right or left
Bale weight: up to 250 kg, depending on material and bale length

Binding:

3-fold vertical

Binding wire:

Soft-annealed, oiled wire, according to DIN 177
(not included in the scope of delivery)

Drive power:

 7.5/11 kW
(depending on model)

pressing force:

 300 kN

Throughput:

 s. Data sheet AVOS 88
Equipment:
  • Durable machine frame in sturdy welded construction, designed for fastening to the hall floor with dowels
  • Rapid/power speed control and automatic speed adjustment, depending on the required pressing pressure for optimum material throughput
  • Cutting blade on the plunger and counter plate, hardened and tempered, for cutting off protruding material. Knife hardness: 56 + 4 HRC
  • Press plunger guide with low-maintenance plastic guides, highly wear-resistant and insensitive to dirt. Excellent accessibility for easy adjustment of the guides to minimize cutting forces
  • Press plunger with feed chute cover for continuous feeding of the machine
  • Fully automatic press channel adjustment on three sides with press pressure-dependent control
  • Automatic wire tying with drill fingers made of highly wear-resistant NAXTRA material and an integrated wire cutting unit guarantees secure bale tying. Possible wire thicknesses (diameter): 2.8 mm/3.1 mm (standard 2.8 mm)
description data

Belt quality:

EP 400/3, 2:0 (DIN quality N)

Belt guide:

6,600 mm, 32° rising

1,000 mm, 0° horizontal

Conveying width:

800 mm

Feed depth:

-500 mm

Belt length:

9,000 mm

Side rail height:

500 mm

Driver height:

50 mm

Driver spacing:

750 mm

Drive power:

2.2 kW

AVOS 1810 BRK-110/100 channel baling press

Highly efficient channel baling press with 1000 kN pressing force and cross tying

Tying with plastic wire

In less than 2 hours, the tying of an Avermann channel baling press was retrofitted from steel wire to plastic wire. Ideal if the bales are to be incinerated.

All-round service for complete customer satisfaction

At EcoTech Solutions Umwelttechnik, the standard is already outstanding.
For precise customization, we offer comprehensive services that go one step further in every respect.
Whether before, during or after the purchase of EcoTech Solutions environmental technology products – we support you not only in Germany, but also internationally in all areas.

On-site consulting.
Our experts will come to your company for an individual consultation!
Service by trained technicians.

Our trained technicians will solve your problems quickly and efficiently.

Service overview
Get in touch
24h hotline

Our customer service technicians are available by phone to answer your questions quickly and competently. For more complex issues, we will put you in touch with the right contact person. On request, EcoTech Solutions Umwelttechnik also offers a professional on-site service to provide optimum support for your systems.

Planning + optimization + modernization

From planning and optimization to modernization: EcoTech Solutions Umwelttechnik offers you comprehensive solutions from a single source. Rely on our holistic expertise to make your recycling and waste systems more efficient and future-proof. Contact us for tailor-made concepts and professional implementation of your projects.

UVV

The regular inspection of work equipment is required by law. EcoTech Solutions Umwelttechnik carries out UVV inspections for you - reliably, thoroughly and professionally. Rely on our expertise to ensure the safety of your systems.

Towards the future with Ecotech Solutions

We are at your disposal with our service and expertise at all times. Contact us and get a non-binding consultation appointment.

Get in touch

EcoTech-Solutions
Environmental technology

Spectrum

Info